Everything you need to know about vape tanks — types of tanks, sub-ohm vs. MTL, how to choose the right tank, and what makes a great tank.

<h2 id="what-is-a-vape-tank">What Is a Vape Tank?</h2>
<p>A vape tank is the component that screws onto a box mod (via the 510 connector), holds your e-liquid, and houses the coil. Unlike pods (which are designed for pod systems), tanks are typically larger, hold more liquid, and are designed for use with more powerful devices.</p>
<h2 id="types-of-vape-tanks">Types of Vape Tanks</h2>
<h3 id="mouth-to-lung-mtl-tanks">Mouth-to-Lung (MTL) Tanks</h3>
<p>Designed for a tight, cigarette-like draw where you first draw vapor into your mouth, then inhale. Features:</p>
<ul>
<li>Tighter airflow &#x2014; more restrictive draw.</li>
<li>Higher resistance coils (above 1 ohm typically).</li>
<li>Lower wattage requirement (10&#x2013;25W typically).</li>
<li>Better suited for balanced PG/VG e-liquids.</li>
<li>More nicotine-efficient &#x2014; works well at higher mg levels.</li>
<li>Best example: Aspire Nautilus series.</li>
</ul>
<h3 id="sub-ohm-tanks-direct-lung">Sub-Ohm Tanks (Direct Lung)</h3>
<p>Designed for large, direct lung draws producing substantial vapor clouds. Features:</p>
<ul>
<li>Wide, open airflow.</li>
<li>Low resistance coils (below 1 ohm).</li>
<li>Higher wattage requirement (30&#x2013;100W+).</li>
<li>Best with high-VG e-liquids (70VG/30PG or higher).</li>
<li>Lower nicotine concentrations recommended (3mg&#x2013;6mg).</li>
<li>Examples: GeekVape Zeus, Eleaf Melo 4S.</li>
</ul>
<h3 id="rebuildable-tanks-rtarda">Rebuildable Tanks (RTA/RDA)</h3>
<p>Advanced tanks where you build and wick your own coils from wire and cotton. Highest performance potential but requires knowledge and time. Not recommended for beginners.</p>
<h2 id="top-fill-vs-bottom-fill">Top Fill vs. Bottom Fill</h2>
<ul>
<li><strong>Top fill:</strong> Open the top of the tank to fill. More convenient &#x2014; no need to remove the tank from the mod. The modern standard.</li>
<li><strong>Bottom fill:</strong> Older design requiring you to remove and flip the tank. Less common today.</li>
</ul>
<h2 id="tank-capacity">Tank Capacity</h2>
<p>Most tanks hold between 2ml and 8ml of e-liquid. Larger capacity means less frequent refilling. Many tanks now come in both standard and extended (bubble glass) capacity versions.</p>
<h2 id="choosing-the-right-tank">Choosing the Right Tank</h2>
<p>The right tank depends on your vaping style. MTL vapers should look at the Aspire Nautilus or similar. Sub-ohm vapers should consider the GeekVape Zeus or Eleaf Melo series. Contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> with your mod and vaping preferences and we&apos;ll make a specific recommendation.</p>

Tanks — Complete Guide to Vape Tanks

Coils come in many types and configurations. Learn about mesh vs. traditional coils, what resistance (ohms) means, and which coil material is right for your setup.

<h2 id="traditional-coils-vs-mesh-coils">Traditional Coils vs. Mesh Coils</h2>
<h3 id="traditional-wire-coils">Traditional (Wire) Coils</h3>
<p>Traditional coils use a thin wire wrapped in a helical coil around cotton wicking material. The wire heats the cotton to vaporize liquid. They&apos;ve been the standard for most of vaping&apos;s history.</p>
<ul>
<li>Reliable and widely available.</li>
<li>Good flavor and vapor for their price.</li>
<li>Can have hot spots if not manufactured consistently.</li>
</ul>
<h3 id="mesh-coils">Mesh Coils</h3>
<p>Mesh coils use a flat mesh strip of metal instead of a wire coil. The larger surface area heats more evenly and more of the cotton at once.</p>
<ul>
<li>More even heating &#x2014; fewer hot spots.</li>
<li>Better flavor consistency.</li>
<li>Often longer lifespan than traditional coils.</li>
<li>Faster ramp-up time.</li>
<li>Now the industry standard in most modern tanks and pods.</li>
</ul>
<h2 id="coil-resistance--what-ohms-mean">Coil Resistance &#x2014; What Ohms Mean</h2>
<p>Resistance is measured in ohms (&#x3A9;) and determines how much power a coil uses and how it vapes.</p>
<ul>
<li><strong>Above 1.0&#x3A9; (high resistance):</strong> MTL coils. Lower power, tighter draw, more throat hit. Better for higher nicotine levels.</li>
<li><strong>0.5&#x2013;1.0&#x3A9; (mid resistance):</strong> A middle ground. Some throat hit with more vapor than pure MTL.</li>
<li><strong>Below 0.5&#x3A9; (sub-ohm):</strong> Direct lung coils. High power, large vapor clouds, intense flavor. Requires lower nicotine.</li>
</ul>
<h2 id="coil-wire-materials">Coil Wire Materials</h2>
<ul>
<li><strong>Kanthal:</strong> The most common wire material. Works in wattage mode only. Reliable and widely available.</li>
<li><strong>Stainless Steel (SS316L):</strong> Works in both wattage and temperature control mode. Slightly cleaner flavor profile than Kanthal.</li>
<li><strong>Nickel (Ni200):</strong> TC mode only. Very accurate temperature sensing but cannot be used in wattage mode.</li>
<li><strong>Nichrome (Ni80):</strong> Heats faster than Kanthal. Wattage mode only. Clean flavor.</li>
</ul>
<h2 id="finding-the-right-coil-for-your-tank">Finding the Right Coil for Your Tank</h2>
<p>Coil compatibility is specific to each tank &#x2014; not all coils are interchangeable. Contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> with your tank model and we&apos;ll help you find the right replacement coil.</p>

Coil Types Explained — Mesh vs. Traditional, Ohms and Materials

Properly priming a new coil is the single most important step for flavor quality and coil longevity. This guide shows you exactly how to do it right every time.

<h2 id="why-priming-matters">Why Priming Matters</h2>
<p>Priming means saturating the cotton wicking material inside a new coil with e-liquid before you fire it. If you fire a dry coil, the cotton burns instantly &#x2014; and a burnt coil can&apos;t be recovered. Proper priming prevents this and ensures your first vape on a new coil tastes as good as it should.</p>
<h2 id="step-1--pre-saturate-the-coil">Step 1 &#x2014; Pre-Saturate the Coil</h2>
<p>Before installing the coil in the tank, locate the small wicking ports (holes) on the side of the coil. These are where e-liquid enters to saturate the cotton.</p>
<ol>
<li>Hold the coil and place 2&#x2013;3 drops of e-liquid directly onto each visible wicking port.</li>
<li>Also place 1&#x2013;2 drops down into the center of the coil from the top opening.</li>
<li>Let it sit for 30&#x2013;60 seconds to absorb.</li>
</ol>
<h2 id="step-2--install-the-coil-and-fill-the-tank">Step 2 &#x2014; Install the Coil and Fill the Tank</h2>
<ol>
<li>Screw or press the coil into place in the tank.</li>
<li>Reassemble the tank and fill with e-liquid as normal.</li>
<li>Close the fill port.</li>
</ol>
<h2 id="step-3--let-it-sit">Step 3 &#x2014; Let It Sit</h2>
<p>This is the step most beginners skip &#x2014; and it&apos;s critical. After filling, let the tank sit upright for at least 5&#x2013;10 minutes without vaping. Longer is better &#x2014; 15&#x2013;20 minutes gives even better saturation, especially with thicker VG-heavy liquids.</p>
<h2 id="step-4--dry-puffs-optional-but-helpful">Step 4 &#x2014; Dry Puffs (Optional but Helpful)</h2>
<p>Take 3&#x2013;5 slow draws on the mouthpiece without pressing the fire button. This draws e-liquid up into the coil via suction. Don&apos;t inhale hard &#x2014; just slow, gentle pulls.</p>
<h2 id="step-5--start-at-lower-wattage">Step 5 &#x2014; Start at Lower Wattage</h2>
<p>Even after priming, start your first few puffs at the lower end of your coil&apos;s recommended wattage range. Give it 5&#x2013;10 puffs at lower wattage before working up to your preferred setting. This &quot;break-in&quot; period allows the cotton to fully saturate as you vape.</p>
<h2 id="signs-of-a-properly-primed-coil">Signs of a Properly Primed Coil</h2>
<ul>
<li>Clean, clear flavor from the first puff.</li>
<li>No burnt or harsh taste.</li>
<li>Consistent vapor production.</li>
</ul>
<h2 id="signs-of-an-improperly-primed-coil">Signs of an Improperly Primed Coil</h2>
<ul>
<li>Burnt taste on the first puff &#x2014; the coil is already damaged and will never fully recover.</li>
<li>Harsh, unpleasant flavor.</li>
</ul>
<p>If you get a burnt taste on the very first puff, the coil was fired before the cotton was saturated. Unfortunately, a burnt coil cannot be fixed &#x2014; replace it and prime the new one properly.</p>

How to Prime a New Coil — The Right Way

Regular tank cleaning improves flavor, prevents leaking, and extends the life of your coils. Learn the step-by-step tank cleaning process.

<h2 id="when-to-clean-your-tank">When to Clean Your Tank</h2>
<ul>
<li>Every time you change your coil.</li>
<li>When switching between significantly different e-liquid flavors (especially from strong flavors like menthol or cinnamon).</li>
<li>If your tank has been sitting unused for an extended period.</li>
<li>If you notice off flavors, reduced performance, or increased leaking.</li>
<li>As a monthly maintenance routine regardless of the above.</li>
</ul>
<h2 id="quick-rinse-for-routine-cleaning">Quick Rinse (For Routine Cleaning)</h2>
<ol>
<li>Empty any remaining e-liquid.</li>
<li>Disassemble the tank &#x2014; separate the glass, base, and top cap.</li>
<li>Rinse each piece under warm running water for 30&#x2013;60 seconds.</li>
<li>Shake off excess water.</li>
<li>Dry each piece thoroughly with a paper towel.</li>
<li>Let air dry on a paper towel for 1&#x2013;2 hours until completely dry.</li>
<li>Reassemble and install a new coil.</li>
</ol>
<h2 id="deep-clean-for-stubborn-residue-or-flavor-ghosting">Deep Clean (For Stubborn Residue or Flavor Ghosting)</h2>
<ol>
<li>Disassemble the tank completely.</li>
<li>Fill a bowl with warm water and let the tank components soak for 30 minutes.</li>
<li>For very stubborn residue, add a small amount of unflavored vodka or clear grain alcohol to the soaking water &#x2014; it helps dissolve e-liquid residue. Rinse very thoroughly afterward.</li>
<li>Use a small bottle brush or cotton swab to clean the chimney and threads.</li>
<li>Rinse all components thoroughly under clean water.</li>
<li>Dry and air dry completely &#x2014; at least 2 hours, overnight if possible.</li>
</ol>
<h2 id="o-ring-maintenance">O-Ring Maintenance</h2>
<p>O-rings are the small rubber seals at each connection point. During cleaning, inspect them for cracks, deformation, or stretching. Apply a tiny amount of food-grade glycerin (VG works) to o-rings periodically to keep them supple and prevent cracking. Most tanks come with replacement o-rings in the packaging &#x2014; keep these safe.</p>
<h2 id="glass-replacement">Glass Replacement</h2>
<p>Tank glass gets scratched over time and can crack if dropped. Most tanks use standard glass that can be replaced. Contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> with your tank model and we&apos;ll help you find replacement glass if needed.</p>

How to Clean and Maintain Your Tank

The Aspire Nautilus is one of the most beloved MTL tanks ever made. This guide covers coil types, compatibility across Nautilus models, and tips for getting the best from your Nautilus.

<h2 id="the-aspire-nautilus-legacy">The Aspire Nautilus Legacy</h2>
<p>The Aspire Nautilus has been one of the most popular mouth-to-lung tanks since its introduction. Loved for its adjustable airflow, excellent flavor, and satisfying throat hit, it&apos;s been a go-to for former smokers and MTL enthusiasts for years.</p>
<h2 id="nautilus-coil-compatibility">Nautilus Coil Compatibility</h2>
<p>The good news about Nautilus coils: they&apos;ve maintained excellent backward compatibility across models. BVC (Bottom Vertical Coil) coils work across the Nautilus, Nautilus Mini, Nautilus 2, Nautilus 3, Nautilus 3S, and Nautilus Nano.</p>
<h2 id="available-nautilus-coil-resistances">Available Nautilus Coil Resistances</h2>
<ul>
<li><strong>1.6&#x3A9; BVC coil:</strong> Most popular. Tight MTL draw, excellent throat hit, works at 9&#x2013;13W. Perfect for former smokers.</li>
<li><strong>1.8&#x3A9; BVC coil:</strong> Very tight draw, maximum throat hit. Best at 8&#x2013;11W.</li>
<li><strong>0.7&#x3A9; BVC coil:</strong> More open draw, more vapor. Best at 14&#x2013;18W. A looser MTL experience.</li>
</ul>
<h2 id="best-e-liquid-for-the-nautilus">Best E-Liquid for the Nautilus</h2>
<p>The Nautilus is designed for MTL vaping with balanced PG/VG e-liquids (50/50 or 60VG/40PG). High-VG liquids are too thick for the BVC coil design and will cause dry hits and reduced coil life. Our SmokEjuice standard line is an ideal match for the Nautilus at any nicotine strength.</p>
<h2 id="tips-for-maximum-coil-life">Tips for Maximum Coil Life</h2>
<ul>
<li>Always prime BVC coils thoroughly &#x2014; let them sit for at least 10 minutes after filling before your first vape.</li>
<li>Keep the tank at least 25% full at all times.</li>
<li>Stay within the recommended wattage range for your specific coil resistance.</li>
<li>Avoid very sweet or heavily sweetened e-liquids &#x2014; they gunk up coils faster.</li>
</ul>
<h2 id="where-to-buy-nautilus-coils">Where to Buy Nautilus Coils</h2>
<p>We keep Aspire Nautilus BVC coils in stock at SmokTek.com. Search &quot;Nautilus coil&quot; or contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> to confirm we have your specific resistance in stock.</p>

Aspire Nautilus Coils — Compatibility and Guide

The GeekVape Zeus is one of the most popular sub-ohm tanks available. Learn about Zeus models, coil options, and how to get the best performance.

<h2 id="about-the-geekvape-zeus">About the GeekVape Zeus</h2>
<p>The GeekVape Zeus is a top-fill, top-airflow sub-ohm tank known for being extremely leak-resistant and delivering excellent flavor. Top airflow design means airflow enters from above the coil rather than below, which virtually eliminates leaking from the airflow slots &#x2014; one of the most common complaints with traditional bottom-airflow tanks.</p>
<h2 id="zeus-models">Zeus Models</h2>
<ul>
<li><strong>Zeus X:</strong> The original Zeus. Dual coil, large capacity, excellent flavor.</li>
<li><strong>Zeus Sub-Ohm:</strong> Simplified version for vapers who prefer pre-built coils over RTA setups.</li>
<li><strong>Zeus RTA:</strong> Rebuildable version for advanced vapers who build their own coils.</li>
</ul>
<h2 id="zeus-coil-options">Zeus Coil Options</h2>
<p>The Zeus sub-ohm uses Z series coils:</p>
<ul>
<li><strong>Z0.2 mesh coil (0.2&#x3A9;):</strong> 40&#x2013;80W. High vapor production, excellent flavor. For experienced sub-ohm vapers.</li>
<li><strong>Z0.4 mesh coil (0.4&#x3A9;):</strong> 25&#x2013;55W. Slightly more moderate. A great balance of vapor and battery efficiency.</li>
</ul>
<h2 id="best-e-liquid-for-the-zeus">Best E-Liquid for the Zeus</h2>
<p>The Zeus is a sub-ohm tank &#x2014; it needs high-VG e-liquids (70VG/30PG or higher) to wick efficiently at its power levels. Balanced 50/50 liquids can work at lower wattages but may cause dry hits at higher settings. Use 3mg or 6mg freebase nicotine &#x2014; never nicotine salts in this tank.</p>
<h2 id="top-fill-system">Top-Fill System</h2>
<p>The Zeus uses a push-button top-fill system. Press the button to slide the top cap open, fill, and slide closed. Clean and quick &#x2014; one of its best design features.</p>
<h2 id="questions">Questions?</h2>
<p>Contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> for Zeus coil availability or to check compatibility with your mod.</p>

GeekVape Zeus Tank — Guide and Coil Compatibility

Kanger coil heads work across a wide range of devices. This guide covers Kanger coil compatibility, available resistances, and the right e-liquid to use.

<h2 id="kanger-coil-head-overview">Kanger Coil Head Overview</h2>
<p>Kanger coil heads (also called Kanger atomizer heads) are some of the most widely compatible coils in vaping, working across a range of Kanger devices as well as many third-party tanks that use the same format. They&apos;re reliable, affordable, and readily available.</p>
<h2 id="compatible-devices">Compatible Devices</h2>
<p>Standard Kanger coil heads are compatible with:</p>
<ul>
<li>Kanger T3s</li>
<li>Kanger Evod series</li>
<li>Kanger Protank series</li>
<li>Kanger Aerotank series</li>
<li>Many third-party tanks that use the standard Kanger coil head format</li>
</ul>
<h2 id="available-resistances">Available Resistances</h2>
<ul>
<li><strong>1.2&#x3A9;:</strong> Good balance of throat hit and vapor. Works at 8&#x2013;14W or on variable voltage devices at 3.3&#x2013;4.8V.</li>
<li><strong>1.5&#x3A9;:</strong> Slightly higher resistance. Good for eGo-style batteries. Works at 7&#x2013;12W.</li>
<li><strong>2.2&#x3A9;:</strong> High resistance. Designed for very low wattage eGo batteries. Tight MTL draw.</li>
</ul>
<h2 id="kanger-subtank-coils">Kanger Subtank Coils</h2>
<p>The Kanger Subtank and Subtank Mini use a different coil format &#x2014; the Kanger OCC (Organic Cotton Coil) system. These come in 0.5&#x3A9; (sub-ohm) and 1.2&#x3A9; options. Contact us for Subtank coil availability.</p>
<h2 id="best-e-liquid-for-kanger-coils">Best E-Liquid for Kanger Coils</h2>
<p>Standard Kanger coil heads work best with balanced or PG-heavy e-liquids (50/50 or 60PG/40VG). High-VG liquids are too thick for these coils and will cause wicking issues.</p>
<h2 id="finding-kanger-coils-at-smoktek">Finding Kanger Coils at SmokTek</h2>
<p>We stock Kanger coil heads in various resistances. Contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> or search &quot;Kanger coil&quot; on SmokTek.com to see current stock.</p>

Kanger Coils — Compatibility Guide

Getting a burnt taste from a brand new coil is frustrating. Learn the most common reasons new coils taste burnt and how to prevent it from happening again.

<h2 id="a-burnt-new-coil-is-almost-always-a-priming-issue">A Burnt New Coil Is Almost Always a Priming Issue</h2>
<p>If your brand new coil tastes burnt from the first puff, the overwhelmingly likely cause is that the cotton wasn&apos;t fully saturated with e-liquid before you fired it. This burns the dry cotton and permanently damages the coil from the first use.</p>
<h2 id="the-fix--proper-priming-for-next-time">The Fix &#x2014; Proper Priming (For Next Time)</h2>
<ol>
<li>Before installing the coil, put 2&#x2013;3 drops of e-liquid directly onto each wicking port on the side of the coil and 1&#x2013;2 drops down the center.</li>
<li>Install the coil, fill the tank, and let it sit upright for a minimum of 10 minutes &#x2014; 15&#x2013;20 minutes is better.</li>
<li>Take 3&#x2013;5 dry puffs (without pressing fire) to draw liquid up into the coil.</li>
<li>Start at the lower end of your wattage range for the first 5&#x2013;10 puffs before increasing.</li>
</ol>
<h2 id="can-a-burnt-new-coil-be-saved">Can a Burnt New Coil Be Saved?</h2>
<p>Unfortunately, no. Once the cotton has been burnt, the damage is permanent. The burnt cotton will continue to produce a harsh, unpleasant taste regardless of how much e-liquid you add. You&apos;ll need to replace it with a new coil and prime it properly this time.</p>
<h2 id="other-possible-causes-of-a-bad-tasting-new-coil">Other Possible Causes of a Bad-Tasting New Coil</h2>
<ul>
<li><strong>Manufacturing defect:</strong> Rare but it happens. If you&apos;ve primed correctly and still get a burnt taste from multiple puffs on a new coil, it may be defective. Contact us for a replacement.</li>
<li><strong>Wrong coil for the wattage:</strong> If you&apos;re running above the coil&apos;s maximum rated wattage, you can burn a coil even with proper priming.</li>
<li><strong>Residue from packaging:</strong> Some coils have a slight off taste for the first few puffs due to manufacturing residue. This is different from a burnt taste &#x2014; it should clear up within 5&#x2013;10 puffs.</li>
<li><strong>Wrong e-liquid type:</strong> Very high VG liquids in small coils won&apos;t wick fast enough and cause dry hits even with proper priming.</li>
</ul>
<h2 id="need-help">Need Help?</h2>
<p>If you&apos;re consistently having issues with new coils, contact us at <a href="mailto:support@smoktek.com">support@smoktek.com</a> with your tank, coil, and e-liquid details. We&apos;ll help diagnose the issue.</p>

Why Is My New Coil Burnt? — Troubleshooting New Coil Issues

Have a question? We're here to help! Fill out the form and we'll get back to you within 1 business day.
Mon–Thu 10am–5pm ET · Fri 10am–4pm ET
Phone: 727-209-7193

SmokTek Home Page

Go back to SmokTek.com

SmokTek Vapor Store

Tanks & Coils

Shipping Policy — How Your Order Gets to You

Where Does SmokTek Ship?

Lost or Damaged Packages — What to Do

How to Place an Order on SmokTek.com

Cancelling or Changing Your Order

My order was marked delivered but it’s not here.

How do I track my order?

Can I edit or add anything to my order?

What do I do if I receive the wrong item in my order?

Do you offer expedited shipping?

Ordering & Shipping

Return &amp; Refund Policy

Returns & Refunds

Age Verification — Why We Check Your Age

Age Verification & Compliance

Gift Certificates — How to Buy and Use Them

SmokTek Rewards Program — How to Earn and Redeem Points

Creating and Managing Your SmokTek Account

How to Leave a Product Review on SmokTek.com

Account & Gift Certificates

My Device Won't Fire — No Vapor or No Power

Burnt Taste — Causes and How to Fix It

My Device Is Leaking — How to Fix It

Weak Vapor or Poor Performance

Device Is Spitting or Gurgling

Coil Burning Out Too Fast

Battery Not Charging or Not Holding Charge

Device Is Getting Hot — Is That Normal?

Disposable Vape Not Working

Pod Not Making Contact or Not Recognized

My E-Liquid Is Changing Color — Is It Bad?

My Order Tracking Isn't Updating

Troubleshooting

What Is Vaping? A Beginner's Introduction

Choosing Your First Vape Device

Understanding Nicotine Strengths

How to Set Up Your New Pod Kit

Making the Switch from Smoking to Vaping

Understanding PG and VG in E-Liquids

How to Maintain and Clean Your Vape Device

Vaping Etiquette — Where and How to Vape Responsibly

Battery Safety — What Every Vaper Needs to Know

Glossary of Vaping Terms

Getting Started

SmokEjuice — Our House Brand E-Liquid Guide

How to Store E-Liquid Properly

E-Liquid Flavor Guide — Finding Your Perfect Vape

DeKang E-Liquids — What You Need to Know

Nicotine Salts vs. Freebase Nicotine — What's the Difference?

Why Does My E-Liquid Taste Different Than Expected?

E-Liquid Safety — Handling and Child Safety

E-Liquids & SmokEjuice

Disposable Vapes — Complete Beginner's Guide

How Long Does a Disposable Vape Last?

How to Charge a Rechargeable Disposable Vape

Lost Mary Disposable Vapes — Product Guide

OXBAR Disposable Vapes — Product Guide

Fruitia x Fifty Bar Disposable Vapes — Product Guide

Are Disposable Vapes Right for Me?

Disposing of Used Vapes and Batteries Responsibly

Disposable Vapes

Pod Kits — Complete Beginner's Guide

How to Fill a Pod — Step by Step

When and How to Replace Your Pod or Coil

SMOK Pod Kits — Device Guide

Vaporesso Pod Kits — Device Guide

Aspire Pod Kits — Device Guide

Kanger Pod Kits and Starter Kits — Device Guide

GeekVape Pod Kits — Device Guide

Pod Kits & Starter Kits

Box Mods — A Complete Introduction

Understanding Wattage and How to Set It Correctly

GeekVape Advanced Mods — Device Guide

Vaporesso Advanced Mods — Device Guide

Eleaf and Joyetech Devices — Product Guide

Common Box Mod Error Messages — What They Mean

Drip Tips — What They Are and How to Choose One

Temperature Control Vaping — What It Is and How to Use It

Advanced Mods & Box Mods

Which Battery Do I Need for My Mod?

Efest, Imren and Blackcell Batteries — Product Guide

Battery Chargers — Guide to Efest Chargers

Battery Storage and Traveling With Batteries

Battery Recycling and Disposal

Battery Cases and Accessories

Batteries & Chargers

Herbal Vaporizers — Complete Beginner's Guide

Yocan Vaporizers — Product Guide

How to Clean Your Herbal Vaporizer

Herbal Vaporizer Troubleshooting

G Pen Vaporizers — Product Guide

Dazzleaf Vaporizers — Product Guide

Herbal Vapes

Nicotine Pouches — Complete Beginner's Guide

Nicotine Pouches — Frequently Asked Questions

Nicotine Pouches

Vaping Accessories Available at SmokTek

Lanyards for Vape Devices — Guide

Accessories

Privacy Policy — How SmokTek Handles Your Data

Terms of Service — SmokTek.com

Health and Safety Disclaimer

Product Authenticity — Are SmokTek Products Genuine?

How to Contact SmokTek Support

About SmokTek — Our Story

Policies & Legal